home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19981211-19990422 / 000161_news@watsun.cc.columbia.edu _Thu Jan 28 10:18:28 1999.msg < prev    next >
Internet Message Format  |  2020-01-01  |  2KB

  1. Return-Path: <news@watsun.cc.columbia.edu>
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.59.30])
  3.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id KAA18666
  4.     for <kermit.misc@watsun.cc.columbia.edu>; Thu, 28 Jan 1999 10:18:26 -0500 (EST)
  5. Received: (from news@localhost)
  6.     by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id KAA09432
  7.     for kermit.misc@watsun.cc.columbia.edu; Thu, 28 Jan 1999 10:01:10 -0500 (EST)
  8. X-Authentication-Warning: newsmaster.cc.columbia.edu: news set sender to <news> using -f
  9. From: Jim Agnew <Agnew@gems.vcu.edu>
  10. Subject: Re: Data Acquisition / RS-232
  11. Date: Thu, 28 Jan 1999 09:20:31 -0500
  12. Organization: Virginia Commonwealth University
  13. Message-ID: <36B0722F.48294CD3@gems.vcu.edu>
  14. To: kermit.misc@mailrelay2.cc.columbia.edu
  15.  
  16. We tested out a medical device with a little ole ps/2 with a 20 meg
  17. hard drive, and it logged data happily with mskermit for 3 days...
  18.  
  19. chugged along quite happily. and did it exactly the way Frank said, too.
  20.  
  21. Jim
  22.  
  23. Jagan Annamalai wrote:
  24. > Thanks for the quick response!
  25. > -Jagan
  26. > Frank da Cruz wrote:
  27. > > In article <36AFB26B.20B3C638@uh.edu>, Jagan Annamalai  <jagan@uh.edu> wrote:
  28. > > : I am trying to collect data from a Mass Spec, RS-232 (ASCII format, I
  29. > > : can set the baud rate, etc).
  30. > > :
  31. > > : I downloaded MS-kermit. What commands do I use so that the data (for a
  32. > > : given amount of time) is saved in a file on the PC?
  33. > > :
  34. > > : I have the manual by Gianone, but I am not able to figure it out :(
  35. > > : Step by step instructions would be greatly appreciated.
  36. > > :
  37. > > log session fff
  38. > > input xxx yyy
  39. > > close session
  40. > >
  41. > > In this example, fff is the name of the desired capture file, xxx is the
  42. > > desired time interval, and yyy is a string that will never come.  This
  43. > > makes it record into the file for xxx seconds.
  44. > >
  45. > > - Frank